bet007足球比分

  • makeininida_rapidcoat
    Domestic
    +91-9654292962
    International
    +91-9654292970

    HAPA

    HAPA
    ?????

    High Adhesion Polymer Alloy (HAPA) plastic coating powders have been specifically designed to provide a long lasting, chemically & mechanically tough coating for both exterior and interior applications. HAPA coatings are a superior choice when compared to the conventionally used PVC and Polyester Coatings. The Coating has excellent adhesion to the base metal and is almost impossible to peel off. We have following grades on the basis of applications -?

    Steps

    Dip Coating

    Spray Coating

    Flame Spray Coating

    Spray Lining

    Roto Lining

    Pre-Treatment

    Removal of oil, dirt, lubrication greases, metal oxides, welding scale etc.

    Removal of oil, dirt, lubrication greases, metal oxides, welding scale etc.

    Removal of oil, dirt, lubrication greases, metal oxides, welding scale etc.

    Removal of oil, dirt, lubrication greases, metal oxides, welding scale etc.

    Removal of oil, dirt, lubrication greases, metal oxides, welding scale etc.

    Pre-Heating

    300°C

    300°C

    -

    300°C

    300°C

    Coating

    Hot substrate dipped in the fluidized tank full of powder where the powder is fluidizing when the pressurized air blown from bottom to top. The substrate will completely dip in the powder.

    Electrostatically charged powder blown on the hot substrate from your regular spray coating gun.

    HAPA powder blown inside the flame to the substrate. The powder melts in transit and forms a solid coating as the substrate cools down.

    Fix the nozzle of the gun on the top of the rotating fire extinguisher and spray the powder inside the extinguisher.

    Fill the powder inside the bottle or cylinder and then the cylinder will spin and tumble so that the cylinder can be coated uniformly. The left out powder removed out of the cylinder.

    Post Heating

    The article will again move to the oven to heat at 230°C for 2-3 minutes.

    The article will again move to the oven to heat at 230°C for 2-3 minutes.

    The article will again move to the oven to heat at 230°C for 2-3 minutes.

    The article will again move to the oven to heat at 230°C for 2-3 minutes.

    The article will again move to the oven to heat at 230°C for 2-3 minutes.

    Applications

    Wire Mesh Fence, Valve, Springs, Cable Tie, Battery Boxes

    Wire Mesh Fence, Valve, Springs, Cable Tie, Battery Boxes

    Wire Mesh Fence, Valve, Springs, Cable Tie, Battery Boxes, Water Proofing of Swimming Pool

    Fire Extinguisher, Cylinder

    Fire Extinguisher, Cylinder

    ?

    ?

    ?

    ?

    ?

    ?

    ?

    ?

    ?

  • news

    Blog

    city

    Celebrity

    Mobile phone

    Super League

    Mobile Games

    aviation

    constellation